SPECIAL OFFER! 30% OFF ON WHOLE HOUSE REPIPE SERVICES!
How much does it cost to install a toilet in Houston? The cost depends on the type of toilet, how many you need, and whether the installation involves any additional work like flange repair or rough-in changes. Standard toilet installations start at $250, while premium high-efficiency models with complex installs can reach $1,200 per unit.
Use our toilet installation cost calculator below to get a personalized estimate based on your specific project. Whether you’re replacing a single toilet or upgrading every bathroom in your home, our calculator uses real Houston-area pricing — not generic national averages. Get your estimate in just a few clicks.
Get a personalized estimate in under 2 minutes.
Enter your info below and we'll show your personalized estimate instantly.
Most Houston homeowners pay between $250 and $1,200 per toilet depending on the type and complexity of the installation. A standard builder-grade toilet runs $250–$500 installed. Mid-range comfort-height models cost $500–$800, and high-efficiency or premium toilets range from $800–$1,200. These prices include the toilet, all parts, labor, and old toilet removal. Use our toilet installation cost calculator below for a personalized estimate.
If your toilet has a simple issue like a running flapper or loose handle, a pipe repair for $75–$150 makes sense. But if you’re dealing with cracks in the porcelain, constant running, frequent clogs, or a toilet that’s over 15 years old, replacement is the smarter investment. Newer toilets use 1.28 gallons per flush compared to 3.5–7 gallons in older models — saving you money on water bills every month.
A straightforward toilet swap takes about 1–2 hours. If the rough-in size needs to change, the flange needs repair, or we’re running new supply lines, it can take 2–3 hours. Either way, your bathroom is back in service the same day. Need it done urgently? We offer emergency plumbing services 24/7.
Standard toilets sit about 15 inches from floor to seat. Comfort-height toilets sit at 17–19 inches — roughly chair height — making them easier to sit down on and stand up from. Comfort-height models are the most popular choice for new installs and cost slightly more due to the upgraded bowl and internal components.
Yes, slightly. Upstairs installations add $75–$150 to the total due to hauling the old toilet down, bringing the new one up, and working in tighter spaces. If your upstairs bathroom also needs flange work or supply line upgrades, that can add to the cost as well.
Yes. When we install 2 or more toilets in the same visit, we apply a multi-unit discount because the setup, travel, and cleanup time is shared across the job. If you’re upgrading multiple bathrooms, doing them all at once is the most cost-effective approach. We also offer 0% financing for 24 months on qualifying projects.
Either works. If you buy your own toilet, make sure to verify the rough-in size (the distance from the wall to the center of the drain — most Houston homes are 12 inches). If you’d rather keep it simple, we supply quality toilets at competitive pricing and can recommend the best fit for your bathroom and budget.
Yes. Every installation includes disconnecting the old toilet, hauling it out of your home, and disposing of it properly. We also inspect the flange and supply line during removal and let you know if anything needs attention before the new toilet goes in.
Choosing the right toilet starts with understanding what’s available and what each option costs. Here are the most common choices for Houston homeowners:
A reliable builder-grade toilet that gets the job done. Round or elongated bowl, single-flush, and available in white or common colors. Best for rental properties, guest bathrooms, or budget-conscious replacements where function matters most.
The most popular choice for homeowners. Sits at chair height (17–19 inches) for easier use, features an elongated bowl for added comfort, and offers better flush performance than standard models. Ideal for primary bathrooms and family use.
WaterSense-certified models that use 1.28 gallons per flush or less — saving water and lowering utility bills. Includes options like dual-flush, soft-close seats, and premium brands like TOTO, Kohler, and American Standard. Best for homeowners who want top performance and long-term savings.
No problem. Our technicians assess your bathroom layout, discuss your preferences, and recommend the best toilet for your space and budget during your free estimate. We’ll make sure the fit, height, and flush performance are right before anything gets installed. Contact us to schedule yours.
No two bathrooms are identical, and neither are their installation costs. Here’s what influences your estimate:
The biggest factor. A basic toilet costs half as much as a premium high-efficiency model. Choose based on your budget, which bathroom it’s going in, and whether water savings matter to you.
| Toilet Type | Installed Cost |
|---|---|
| Standard | $250–$500 |
| Mid-Range / Comfort Height | $500–$800 |
| High-Efficiency / Premium | $800–$1,200 |
More toilets in one visit means a lower cost per unit. We apply a multi-unit discount when installing 2 or more because the setup, travel, and cleanup are shared across the job.
Ground-floor installations are straightforward. Upstairs bathrooms add $75–$150 per toilet due to hauling, access, and tighter working spaces.
Removal and disposal of your existing toilet is included in our standard pricing at $50–$75 per unit. If you’re installing in new construction or the old toilet is already out, that cost doesn’t apply.
If the flange is damaged, the supply line needs replacing, or the rough-in size doesn’t match your new toilet, additional work may be needed. Flange repair runs $50–$150. Rough-in changes that require moving the drain can add $200–$600 depending on the scope. Our plumbing services team handles all of this as part of the install.
Every toilet installation estimate we provide is clear, upfront, and tailored to your specific project. We quote based on the toilet type, quantity, and any additional work needed — no hidden fees, no surprise charges after the job is done. You’ll know exactly what you’re paying and what’s included before we start. From a single toilet swap to a full-home upgrade, our pricing is straightforward because we believe that’s how you earn trust.
Wondering what a new toilet will cost you? Our interactive Toilet Installation Cost Calculator gives you a personalized estimate in under two minutes. Select how many toilets you need, pick your preferred type, tell us about your installation details, and see accurate Houston-area pricing instantly. Because our tool uses real local project data, you’ll get region-specific numbers — not inflated national averages. Use your results to plan your bathroom project with confidence.
A basic toilet swap might look simple, but there’s more to it than bolting a new one down. The wax ring needs to seat perfectly to prevent leaks, the flange has to be level and in good condition, the supply line needs proper connection, and the toilet has to be shimmed and caulked for a stable, clean finish.
A professional installation takes 1–2 hours and eliminates the risk of a bad seal that leaks sewage, a cracked flange that requires floor repair, or a wobbly toilet that loosens over time. Our licensed plumbing team handles the full job — removal, inspection, installation, and cleanup — and every install is backed by our workmanship guarantee.
Not every toilet problem means you need a new one. But there are clear signs that replacement is the smarter move:
If your toilet is over 15 years old and you’re experiencing any of these issues, replacing it saves money in the long run and gives you better performance, lower water bills, and a bathroom that looks and works like new. While you’re upgrading, it may also be worth considering a whole house repipe if the rest of your plumbing is aging too.
These ranges include the toilet, all parts, labor, old toilet removal, and cleanup. Upstairs installations add $75–$150 per unit.
Toilets are low-maintenance, but a few things keep them running smoothly for years:
| Component | Maintenance | Typical Cost |
|---|---|---|
| Flapper valve | Replace every 3–5 years | $5–$15 |
| Fill valve | Replace every 5–7 years | $10–$25 |
| Wax ring | Replace only if leaking at base | $10–$30 + labor |
| Supply line | Replace if corroded or cracked | $10–$20 |
| Handle/flush lever | Replace if loose or broken | $10–$20 |
Most of these are minor repairs that cost under $30 in parts. If you’re replacing multiple internal components, it’s worth comparing the repair cost to the price of a new toilet — especially if your current one is over 15 years old.
Ready to upgrade your bathroom? Whether you need one toilet replaced or want to upgrade every bathroom in your home, we’ll provide a free on-site estimate with honest, upfront pricing. Use our calculator above for an instant ballpark, or contact us to schedule your free in-home consultation.